FLOP EARED DONKEY WOODCARVING BLANK

HOME --- LINKS --- CONTACT US --- SITE MAP

Angel --- Hand & Cross --- Mobius Strip --- Big angel --- Carving Cross --- Dove & Cross

fully carved example of the flop eared donkey  band sawn blank for the flop eared donkey

Flop eared donkey wood carving blank.

The donkey carving blank is 3 inches tall and 4 1/2 inches long. The carving blank is 1 3/8 inches thick and is a good beginner project using a carving knife and gouges. The donkey's tummy should stick out 1/8 of an inch on either side. The donkey's hair is applied using a small gouge.
The finished carving shown on the left is an example and is not included with the carving blank.
A colored 8 1/2 x 11 inch go-by sheet is included.

go-by sheet with several views of the completed donkey carving



COST -- $8.00


TOP OF PAGE --- HOME --- LINKS --- CONTACT US --- SITE MAP

Angel --- Hand & Cross --- Mobius Strip --- Big angel --- Carving Cross --- Dove & Cross




Get CoffeeCup Web Design Software

Valid HTML 4.0 Transitional